Share this product
Few units left
Need to power an outdoor access point, CPE, or IP camera without running a separate power cable? The 24V 1A PoE Injector Power Supply, available at Talisa Technologies (talisaphones.co.ke), injects power directly into a standard Ethernet cable, letting you send both power and data to your device over a single run. If you've been searching for the price of a 24V PoE injector in Kenya, this adapter is a staple accessory for installers setting up outdoor wireless gear, IP cameras, and other PoE-powered equipment.
Built for everyday PoE installations, this injector is a go-to choice for anyone searching for a PoE power adapter in Kenya, a 24V passive PoE injector, or a power supply for MikroTik, Ubiquiti, or TP-Link outdoor devices.
Many outdoor wireless devices, such as MikroTik CPE units, Ubiquiti airMAX radios, and various outdoor access points, rely on Passive PoE for power rather than drawing from a wall socket directly at the mounting location. This 24V 1A injector takes a standard AC power input and injects 24V DC power onto the unused wire pairs of an Ethernet cable, which then carries both data and power to the connected device, simplifying installation on rooftops, poles, and masts where running a separate power line would be impractical or costly. It typically includes two RJ45 ports, one for the LAN connection coming from your router or switch, and one for the PoE output cable running to the powered device, making setup straightforward with no special configuration required. Compact and lightweight, it's designed to sit indoors near your network equipment while the powered device remains outdoors at the far end of the cable run. Shop with confidence at talisaphones.co.ke, your trusted destination for genuine networking power accessories in Kenya.
Feature | Details |
|---|---|
Product Type | Passive PoE Injector Power Supply |
Output Voltage | 24V DC |
Output Current | 1A |
Output Power | Approx. 24W |
PoE Type | Passive PoE (non-standard, check device compatibility) |
Ports | 2 x RJ45 (LAN-in, PoE-out) |
Input Voltage | 100-240V AC |
Cable Distance | Suitable for standard Ethernet cable runs, consult device manual for max distance |
Compatible Devices | MikroTik, Ubiquiti, TP-Link, and other 24V passive PoE equipment |
Ideal Use | Outdoor APs, CPE radios, IP cameras, wireless bridges |
Sold By | Talisa Technologies, talisaphones.co.ke |
Simplified Installation – Powers outdoor devices over the same cable carrying network data, no separate power line needed
Wide Device Compatibility – Commonly used with MikroTik, Ubiquiti, TP-Link, and similar 24V passive PoE equipment
Compact Design – Small footprint fits easily near a router, switch, or patch panel
Reliable Power Delivery – Stable 24V 1A output suited for typical outdoor CPE and AP power requirements
Affordable Essential – A low-cost accessory required for most outdoor wireless deployments
Genuine Product Guarantee – Purchase with confidence from Talisa Technologies, a trusted networking accessories retailer in Kenya
Installers powering outdoor access points, CPE radios, and wireless bridges; security integrators running PoE-powered IP cameras; ISPs and WISPs deploying rooftop or pole-mounted equipment; anyone replacing a lost or damaged PoE adapter for existing networking gear across Nairobi and Kenya.
What's the difference between passive PoE and standard 802.3af/at PoE?
Passive PoE simply applies a fixed voltage to the Ethernet cable without any negotiation with the connected device, while standard 802.3af/at PoE involves a handshake process to safely detect and supply the correct power level. Always check your device's power requirements before connecting a passive injector.
Is this injector compatible with my device?
This 24V 1A injector is commonly used with MikroTik, Ubiquiti, and similar branded equipment that specifies 24V passive PoE input, check your device's power specifications or datasheet to confirm compatibility before use.
How far can I run cable from the injector to my device?
Cable distance depends on your specific device and cable quality, but passive PoE setups typically perform reliably within standard Ethernet cable length limits, consult your device's manual for exact recommendations.
Can this injector damage a device that isn't rated for 24V?
Yes, connecting a 24V passive PoE injector to a device not rated for that voltage can cause damage. Always confirm your device's required voltage before powering it with this injector.
Talisa Technologies is a trusted networking power accessories supplier in Kenya, offering genuine, quality tested products with reliable delivery nationwide. As a dependable source for installers, WISPs, and security integrators, we guarantee authentic hardware and solid after sales support. If you need a reliable way to power your outdoor networking equipment, this 24V 1A PoE Injector Power Supply is a practical, essential choice.
Delivery Information
Delivery within 1-2 days in Nairobi. Countrywide shipping available.
Return Policy
Free return within 7 days for eligible items.
Genuine items, warranty guaranteed
Fast delivery countrywide