Share this product
In stock
Need to extend your Gigabit Ethernet network over fibre optic cable? The Netlink Single-Mode Media Converter 1000Base-FX, available at Talisa Technologies (talisaphones.co.ke), converts 10/100/1000M copper Ethernet signals into 1000M fibre optic signals, letting you push Gigabit speeds across much longer distances than copper cable allows. If you've been searching for the price of Netlink Gigabit media converter in Kenya, this converter is an efficient, cost effective way to bridge Gigabit fibre backbones with standard network equipment.
Built for Gigabit Ethernet fibre extension, this converter is a strong pick for anyone searching for a Gigabit single-mode fibre media converter in Kenya, an RJ45 to SC Gigabit fibre converter, or a 1000Base-FX Ethernet extender.
Copper Ethernet cable is limited to around 100 meters, but this Netlink Gigabit media converter extends that reach significantly by converting the signal to single-mode fibre, supporting transmission distances of up to 100km. It uses single fibre transmission technology, sending both directions of data over one strand of fibre rather than two, effectively doubling the fibre efficiency compared to twin fibre converters. The RJ45 port supports auto-negotiation across 10/100/1000M speeds and full or half duplex mode, with MDI/MDI-X auto crossover for hassle free cabling. Six status LEDs make it easy to monitor power, link, and activity at a glance, helping technicians quickly diagnose faults on site. Shop with confidence at talisaphones.co.ke, your trusted destination for genuine networking and fibre optic equipment in Kenya.
Feature | Details |
|---|---|
Product Type | Gigabit Ethernet Fibre Media Converter |
Standard | IEEE 802.3z/ab 1000Base-T, 1000Base-SX/LX |
Data Rate | 10/100/1000Mbps, auto-negotiation |
Duplex Mode | Full or Half Duplex |
Ports | 1 x RJ45 (10/100/1000Mbps), 1 x SC fibre port (1000Mbps) |
Fibre Type | Single-mode, 8.3/125, 8.7/125, or 9/125μm |
Transmission Distance | Up to 100km |
Fibre Configuration | Single fibre (bi-directional over one strand) |
LED Indicators | Power, FX, FX Link/Act, TX, TX FDX, TX Link/Act |
MAC Address Table | 4K |
Data Buffer | 256K |
Power Supply | AC 110-240V to DC 5V, or DC 48V to DC 5V |
Ideal Use | Gigabit LAN to fibre backbone extension, ISP networks, campus and data center links |
Sold By | Talisa Technologies, talisaphones.co.ke |
Gigabit Speed Extension – Converts copper Ethernet to fibre while maintaining full Gigabit throughput
Long Range Reach – Supports single-mode fibre transmission distances of up to 100km
Efficient Single Fibre Design – Transmits both directions over one fibre strand, doubling fibre capacity efficiency
Auto-Negotiation – RJ45 port automatically detects speed and duplex mode for easy setup
Reliable Monitoring – Six LED indicators give a clear view of power, link, and activity status
Genuine Product Guarantee – Purchase with confidence from Talisa Technologies, a trusted networking and fibre optic equipment retailer in Kenya
ISPs extending Gigabit Ethernet networks over fibre backbone links; data centers and campuses connecting buildings over long distances; network installers bridging Gigabit LAN equipment to fibre infrastructure across Nairobi and Kenya.
What does a 1000Base-FX media converter do?
It converts Gigabit Ethernet signals between copper (RJ45, 10/100/1000Base-T) and single-mode fibre optic cable (1000Base-FX), allowing Gigabit networks to be extended over much longer distances than copper alone allows.
How far can this converter transmit data?
This Gigabit single-mode converter supports transmission distances of up to 100km, depending on fibre quality and installation conditions.
Do I need two converters for a fibre link?
Yes, media converters must be used in pairs, one at each end of the fibre link, since the transmit and receive wavelengths differ between the two units.
What's the difference between the 100Base-FX and 1000Base-FX converter?
The 100Base-FX converter supports Fast Ethernet speeds up to 100Mbps, while the 1000Base-FX converter supports full Gigabit speeds up to 1000Mbps, making it better suited for higher bandwidth applications.
Talisa Technologies is a trusted networking and fibre optic equipment supplier in Kenya, offering genuine, quality tested products with reliable delivery nationwide. As a dependable source for ISPs, IT technicians, and network installers, we guarantee authentic Netlink hardware and solid after sales support. If you need to bridge Gigabit Ethernet and fibre networks, this Netlink Single-Mode Media Converter 1000Base-FX is a reliable, high performance choice.
Delivery Information
Delivery within 1-2 days in Nairobi. Countrywide shipping available.
Return Policy
Free return within 7 days for eligible items.
Genuine items, warranty guaranteed
Fast delivery countrywide