Share this product
Genuine items, warranty guaranteed
Fast delivery countrywide
Signal Fire AI-9 Fiber Fusion Splicing Machine Price in Kenya | Talisa Technologies
Searching for the Signal Fire AI-9 fusion splicer price in Kenya? Talisa Technologies (talisaphones.co.ke) stocks the Signal Fire AI-9, a six motor, core alignment fusion splicer built for fast, low loss fibre joins in the field. With a typical 5 second splice, a 15 second sleeve heating cycle and a built-in power meter and visual fault locator, it helps FTTH installers and ISP crews finish more joins per day with fewer redo’s. Whether you’re comparing fibre splicing machine prices in Kenya, upgrading from a basic fixed-V-groove unit, or kitting out a new installation team, this page covers what you need to know.
Why Choose the Signal Fire AI-9?
Core alignment for low loss joins. The AI-9 uses six motors with auto focus to align the fibre cores before fusing, which is what keeps splice loss low and links reliable. It also supports cladding alignment when you need it, so one machine covers most fibre types and job conditions.
Fast where it counts. Typical splice time is about 5 seconds and the sleeve heating cycle is about 15 seconds for a 40mm sleeve. Over a day of drop cable and ATB work, those seconds add up to a lot more completed customers. Heating can be adjusted for cold or windy conditions.
Built for a full day on site. The 7800mAh battery is rated for around 240 splice and heat cycles on a full charge, so you can work through a typical FTTH route without hunting for a socket. The electrodes are rated for roughly 3,000 splices before replacement.
Large, clear display. A 5.5 inch TFT screen shows the fibre ends in sharp detail and makes alignment easy to check, even outdoors. A quad-core processor keeps the machine responsive, and it is ready to work in a few seconds after power on.
Power meter and visual fault locator built in. The AI-9 includes an optical power meter (about -70 to +3 dBm) calibrated for 850, 1300, 1310, 1490, 1550 and 1625nm, plus a red light source for tracing breaks and checking continuity. That means one less tool to carry.
Works with the fibre you actually install. It handles single mode (G.652 and G.657), multimode (G.651), dispersion shifted and NZDS fibre, and suits bare fibre, pigtails, drop cable and patch cords.
Toolbox that works as a seat. The carrying case has a detachable section that works as a small stool or work table, which is handy on poles, rooftops and cramped ceiling spaces.
Things to know before you buy. Fusion splicing needs proper preparation, so you will need a good cleaver, stripper and cleaning supplies for consistent results. Splice loss and speed also depend on the fibre, how clean it is and how well it is cleaved. If you are new to splicing, ask us for a quick walkthrough before you head out. Shop with confidence at talisaphones.co.ke, your trusted destination for genuine fibre tools in Kenya.
Signal Fire AI-9 Specifications
Feature | Details |
|---|---|
Product Type | Six motor core alignment fusion splicer |
Brand / Model | Signal Fire AI-9 |
Alignment | Core alignment (cladding alignment option) |
Motors | 6, with auto focus |
Splice Time | About 5 seconds (typical) |
Heating Time | About 15 seconds (40mm sleeve), adjustable |
Display | 5.5" TFT LCD |
Battery | 7800mAh lithium, about 240 splice and heat cycles per full charge |
Electrode Life | About 3,000 splices |
Built-in Tools | Optical power meter (about -70 to +3 dBm) and visual fault locator |
Power Meter Wavelengths | 850, 1300, 1310, 1490, 1550, 1625nm |
Fibre Types | SM (G.652, G.657), MM (G.651), DS, NZDS |
Operating Temperature | About -15 to 50 degrees C |
Weight | About 2.1kg (splicer with battery); about 7kg full kit with case |
Case | Hard carrying case with detachable stool or work table |
In the Box | Splicer, battery, charger, toolbox and standard accessories (confirm exact contents on your unit) |
Condition | Confirm whether new or used, plus ARC calibration and warranty details, with Talisa |
Price in Kenya | Contact Talisa Technologies for current pricing and stock availability |
Sold By | Talisa Technologies, talisaphones.co.ke |
Key Benefits at a Glance
Core Alignment, Six Motors: Low loss, repeatable splices
5 Second Splice, 15 Second Heat: More joins per day
Long Battery Life: Around 240 cycles per charge
Built-in Power Meter and VFL: Test and trace without extra tools
Wide Fibre Support: Single mode, multimode and drop cable
Portable Kit With Work Stool: Practical for poles, roofs and ceilings
Genuine Product Guarantee: Purchase with confidence from Talisa Technologies, a trusted fibre tools supplier in Kenya
Who Should Buy the Signal Fire AI-9?
ISP installers and FTTH contractors who splice every day; telecom and CCTV technicians running fibre backbones; small ISPs starting their own network; technical teams replacing an older or slower splicer; and anyone comparing the Signal Fire AI-9 with cheaper fixed-V-groove machines and wanting faster, lower loss results across Nairobi and Kenya.
Complete Your Fibre Installer Kit
A splicer works best with the right tools around it. Pair it with:
GLK automatic fibre cleaver for clean, flat fibre ends
Networking tool kit for everyday installs
Handboss foam cleaner for clean fibre and connectors
Fiber ATB boxes and adapter boxes for customer termination
FAT box splitters for distributing the signal
1KM fibre optic outdoor drop cable for the run
Wooden pole climbers with back harness for pole work
Browse everything in our networking category.
Buying a Fusion Splicer? Check These First
Before you pay, whether the unit is new or used, confirm:
ARC calibration: ask whether the machine has been calibrated and how it was tested.
Electrode condition: check how many splices the electrodes have done, and whether spare electrodes are included.
Battery: confirm the battery holds a charge and ask about its age.
Accessories: make sure the charger, fibre holders, toolbox and stripper are all in the box.
Test splice: ask for a live demo splice and check the estimated loss on screen.
Warranty: confirm what it covers and for how long, and get it in writing.
Frequently Asked Questions
What is the Signal Fire AI-9 price in Kenya?
Pricing varies with market conditions and stock availability. Contact Talisa Technologies directly at talisaphones.co.ke for the current price and any ongoing offers.
Is the AI-9 a core alignment splicer?
Yes. It uses six motors with auto focus for core alignment, and also supports cladding alignment. Core alignment gives lower splice loss than basic fixed-V-groove machines.
How fast is it?
Typical splice time is about 5 seconds and sleeve heating about 15 seconds. Real world times vary with the fibre type, cleaning and site conditions.
How many splices can I do on one charge?
The battery is rated for around 240 splice and heat cycles on a full charge. Cold weather and heavy use of the display can reduce this.
Can it splice drop cable and patch cords?
Yes. It is suitable for bare fibre, pigtails, drop cable and jumpers, as well as single mode and multimode fibre. Always use the right fibre holders for your cable type.
Does it have a power meter?
Yes. It includes a built-in optical power meter and a visual fault locator for continuity checks and tracing breaks.
What else do I need to start splicing?
You will need a quality cleaver, a fibre stripper, cleaning supplies and splice sleeves. We stock cleavers and installer tools, so you can pick everything up in one place.
Does it come with a warranty?
Warranty terms depend on the unit in stock. Ask us about warranty cover and after-sales support before you buy.
Where can I buy a Signal Fire AI-9 in Kenya?
You can buy one directly from Talisa Technologies at talisaphones.co.ke, with same day delivery in Nairobi and countrywide delivery.
Get Yours from Talisa Technologies
Talisa Technologies is a trusted fibre and networking supplier in Kenya, offering genuine products with reliable delivery nationwide. If you’re comparing the Signal Fire AI-9 price in Kenya across different sellers, buy with confidence from a supplier that stands behind its products and offers dependable after-sales support.
Delivery Information
Delivery within 1-2 days in Nairobi. Countrywide shipping available.
Return Policy
Free return within 7 days for eligible items.